Volume reduction is a process that reduces fat in localized areas of the body. The fat tissue that is bound together by fibrous tissue is broken down so that the fat cells in those areas are eliminated and volume is reduced.
A non surgical treatment that stimulates collagen and elastin production to improve texture and firmness in the skin. The procedure works by using targeted energy to affect deeper layers of skin to smooth cellulite and reduce fat.
A non-invasive procedure that targets and eliminates the lumpy, dimpled flesh known as cellulite. The body becomes firmer and leaner once the cellulite has been reduced.
Treatments that eliminate fat cells in troublesome areas. Fat can be visibly reduced by targeting pockets of fat that are difficult to remove with diet and exercise.
The temperature is increased in the tissue around the abdomen to break down fat cells. Ultimately, the volume is reduced, therefore, reducing the circumference of the abdomen.
Flaccid skin is skin that has become loose or begins to sag. This normally happens as people age when the skin looses collagen and elasticity.
Radio frequency fat reduction is a procedure that involves using radio frequency to deliver heat to targeted areas of fat. Once the fibrous tissue is heated, the fat is eliminated and the body is contoured.
Advanced Skin Fitness is proud to be the first clinic in Dallas to offer truSculpt 3D, a non-surgical fat reducing and body sculpting procedure that offers TRU 3D results, by using a multi-dimensional approach to body contouring. This non-invasive procedure utilizes monopolar radio frequency energy in the first “closed loop” system to send uniform heat to deep layers of the skin to specifically reduce fat and to contour problem areas.
The truSculpt 3D technology is a new advancement in body sculpting that focuses on three specific characteristics; dimension, definition, and depth. This threefold technology effectively reduces the circumference around areas of the body with stubborn fat. This stubborn fat is subcutaneous adipose tissue beneath the skin. This tissue is your body’s way of storing energy for future use in the form of fat and it can be very difficult to reduce through regular diet and exercise alone.
truSculpt 3D is ideal for people who want to target areas that are unresponsive to diet and exercise or areas where they tend to quickly regain fat, even after they’ve had significant weight loss. Many people are only a few pounds away from their ideal weight, but stubborn fat is preventing them from reaching their goal. truSculpt®3D is one of the best treatments to solve this problem. Not only does it reduce fat, it creates contours on the body, tightens the skin, and is FDA cleared for the cellulite reduction.
With the use of a handpiece, the truSculpt 3D process works by gliding the mechanism across a patient’s body. It’s a painless procedure that allows the patient to lie still during the entire treatment in quiet comfort. Most patients describe the sensation like a hot stone massage in a relaxing spa.
truSculpt 3D is considered to be one of the most effective fat reducing and body sculpting procedures that deliver results in the quickest period of time. With just one session, patients can expect to see a 25-35% reduction in fat in the treated areas.
The truSculpt 3D technology is far superior to previous technology because it increases the depth and heat, resulting in more fat reduction, more skin tightening, and more contouring. What makes truSculpt 3D so impressive is that fat can be reduced significantly in one treatment making multiple sessions unnecessary. truSculpt 3D can also treat several areas of the body in the same session, whether they’re large or small.
Because truSculpt 3D is a newer procedure, patients have questions about the treatment that we’re happy to answer.
truSculpt 3D is able to treat up to 4 areas of the body in one session. truSculpt 3D designed to treat stubborn areas of the body where fat won’t budge like the abdomen, thighs, buttocks, flanks, bra line and other problem areas.
Patients with a BMI of 38 or less and who have stubborn pockets of fat that they would like to shed on different areas of the body are good candidates for TruSculpt 3D. The ideal patient for truSculpt 3D has a BMI of less than 30 and would like to reduce fat in specific areas of the body.
Patients with metal in their bodies cannot have the truSculpt 3D procedure. If you have metallic implants, a pacemaker, an internal defibrillator or joint replacements in the area you want to have treated, you cannot have the truSculpt 3D procedure. Pregnant women or women who are trying to get pregnant are also not able to have the procedure.
Yes, truSculpt 3D is safely used on all skin types.
Usually, it takes about 15-30 minutes for one area.
It only takes one session to see noticeable fat reduction and body contouring. truSculpt 3D as a cellulite treatment can take multiple sessions.
With one truSculpt 3D treatment patients should see over 20% in fat reduction. Patients have the option to schedule more treatments after the first one, but they should be spaced at least 6-8 weeks apart. Consult with your technician for the best timeframe.
The truSculpt 3D does not involve pain and there are no side effects.
When patients receive the truSculpt 3D treatment, they normally feel a warm sensation. This sensation is not painful and is very tolerable. After the treatment patients may experience mild irritation and redness, which gradually clears up.
No, there is no downtime after the truSculpt 3D treatment.
The truSculpt 3D procedure is non-surgical, so the patient is able to resume their daily activities without needing downtime. Some patients may have a moderate amount of discomfort, but they’re able to return to their work following their treatment.
truSculpt 3D uses heat to reduce fat and Coolsculpting uses cold to reduce fat.
Although they’re both non-invasive procedures that target and destroy specific fat cells that are naturally expelled through the body, truSculpt 3D uses radiofrequency technology to heat fat cells and CoolSculpting freezes fat cells for fat reduction and body contouring. We can discuss which treatment is better suited to your unique situation.
Cellulite is a skin condition that is characterized by a dimply, orange peel like accumulation of fat. It’s usually found on the hips, thighs, stomach and buttocks and can be difficult to conceal. It develops when fat is pushed through connective tissue up to the dermis and epidermis of skin. Although it mainly afflicts about 80% – 90% of women, a small percentage of men are also affected with the skin condition. This imbalance is due to the problems in structural connective tissue factors relating to women which creates conditions for poor circulation and poor lymphatic drainage of the outer most fat.
Diet and exercise may seem like the answer for reducing cellulite, but it may not work once the circulation and lymphatic drainage has been impaired. Fat cells won’t become small enough to smooth out the skin, so no matter how much you cut out fat and calories and no matter how much you workout, the cellulite could remain. If you want a more definite and effective treatment for cellulite reduction, TruSculpt 3D is one of the best non-invasive procedures for eliminating the stubborn fat deposits on the hips, thighs, stomach and buttocks.
TruSculpt is an FDA approved aesthetic treatment that can reduce and eliminate cellulite by using radio frequency (RF) energy to heat deep layers of the skin and fat, which contours the body and reduces circumference destroying fat cells. A technician glides a hand piece across the patient’s body as it delivers the deep heat.
The TruSculpt 3D is a new technology that focuses on three specific characteristics, which are dimension, definition, and depth to target cellulite and reduce the fat cells that contribute to the dimpling of the skin. Several areas can be treated simultaneously while providing fast results and without causing discomfort to the patient.
There are many treatments on the market that focus on cellulite reduction, but TruSculpt 3D is a one of the only procedures that shows results in only one or two treatments. Within a few weeks patients will notice the cellulite begin to minimize revealing firmer smoother skin.
At Advanced Skin Fitness our technicians use TruSculpt 3D to provide patients with a comfortable and painless procedure that can be performed while they lie still in a quiet environment. Patients don’t require downtime after the procedure and there are little to no side effects.
TruSculpt 3D is recommended for anyone who struggles with cellulite. Those who have had little to no success with eliminating cellulite through conventional methods will particularly appreciate how effective this treatment can be.
Many have found that even if they’ve lost a substantial amount of weight, the cellulite has not improved, contouring has not occurred and the skin has not tightened or become any smoother.
“TruSculpt 3D is recommended for anyone who struggles with cellulite. Those who have had little to no success with eliminating cellulite through conventional methods will particularly appreciate how effective this treatment can be.”
Patients should by hyper hydrated by drinking plenty of water and they should remove all jewelry and piercings on the treatment area.
How many areas affected with cellulite can be treated with TruSculpt 3D?
TruSculpt 3D is able to treat up to 4 areas of the body in one session, particularly the hips, thighs, buttocks and stomach, where cellulite commonly appears.
Patients who have stubborn cellulite that won’t budge from diet and exercise and who have no more than 10-20 pounds that they need to shed on different areas of the body are good candidates for TruSculpt 3D.
The ideal patient for TruSculpt 3D has a BMI of less than 30 and would like to reduce fat in specific areas of the body.
Patients with metal in their bodies cannot have the TruSculpt 3D procedure.
If you have metallic implants, a pacemaker, an internal defibrillator or joint replacements in the area that you want treated, you cannot have the TruSculpt 3D procedure. Pregnant woman are also not able to have the procedure.
TruSculpt 3D is safely used on all skin types.
Usually it takes less than 90 minutes for one session. The TruSculpt 3D device will be on the patient a 60-minute patient cycle.
It only takes one session to see noticeable cellulite reduction and body contouring but some patients require an additional treatment(s).
Patients should see significant cellulite reduction after just a single treatment. Patients have the option to schedule more treatments after the first one, but they should be spaced at least 8 weeks apart. Consult with your technician for the best timeframe.
The TruSculpt 3D does not involve pain and there no side effects.
When patients receive the TruSculpt treatment, they normally feel a warm sensation. This sensation is not painful and very tolerable. After the treatment patients may experience mild irritation and redness, which gradually clears up.
There is no downtime after the TruSculpt 3D treatment. The TruSculpt 3D procedure is non-surgical, so the patient is able to resume their daily activities without needing downtime. Some patients may have a moderate amount of discomfort, but they’re able to return to their work following their treatment.
TruSculpt 3D shows results in just one session and permanently removes fat.
THINK YOU MIGHT WANT TO TRY A TREATMENT BUT NOT SURE?
BOOK A CHAT WITH ONE OF OUR AESTHETIC EXPERTS AND GET A FREE TREATMENT PLAN WITH OPTIONS PERFECT FOR YOU!
Please complete the form (all fields are required). We look forward to speaking with you soon!
ADVANCED SKIN FITNESS MEDICAL SPAS AND COOLSULPTING CENTERS have been pioneering and improving non-invasive aesthetic treatments for years. We refuse to settle for out-of-the box, pre-packaged approaches to patient’s needs. Often, the best results come from combinations of treatments. We find the right combination of treatments and approaches for YOUR individual situation to help you realize the best YOU possible.
Want to hear about upcoming promotions and get exclusive offers? Sign up for our newsletter!